Nivis Versa Router 1100 Titan - User Guide
v1.2
Page 94 of 111
5.7.3.3
Configure Edge Router modules to use open communication
This step must be performed
after
setting the “transparent” mode, as setting the transparent mode
automatically configures the Edge Router modules to use OpenVPN. After setting the “transparent” mode, the
Edge Router software restarts rendering the web interface inaccessible for few tens of seconds. Wait until the
web interface is accessible.
1.
Point a web browser to the Edge Router /admin/ website (http://<quark_ip>/admin/), enter credentials
2.
Go to “Advanced settings” page
3.
Choose “BHManager” from “Section” drop-down
4.
Choose “SECURITY” in “Variable“ drop-down
5.
Set the field “Value” to “none” (no quotes, not other char)
6.
Go to “Network” page
7.
Perform a “Soft Restart” to activate the changes
