10
FIG.5
Installing the Mounting Brackets
10.
If installing optional cabinets, repeat Step 8 and 9 for each cabinet.
11.
Slide the UPS and any other optional cabinets into the rack.
12.
Secure the front of the UPS to the rack using one M5×12 pan-head screws and one M5 cage nuts
on each side (see FIG. 5). Install the bottom screw on each side through the bottom hole of
mounting bracket and the bottom hole of the rail.
Repeat for any optional cabinets.
FIG.6
Securing the Front of the Cabinet
13.
Continue to the following section, “Rackmount Wiring Installation.
Rackmount Wiring Installation
T
his section explains:
Installing the UPS, including connecting the UPS internal batteries
Connecting any Optional EBP
Installing the UPS
NOTE
Do not make unauthorized changes to the ups; otherwise, damage may
occur to your equipment and void your warranty.
NOTE
Do not connect the ups power cord to utility until after installation is
completed.
To install the UPS:
1. Remove the front cover of each UPS
Hold the cover part without LCD on the right side and extract it (see Fig.8)
