11
FIG.7
Extract UPS front cover
2.
Connect the internal battery connector (see FIG. 8)
Connect red to red, Press the connector tightly together to ensure a proper connection.
Remarks: Please note above step 1 & 2 only for replacing batteries or adding the internal batteries.
The plug will be connected properly if the UPS is with batteries installed.
CAUTION:
A small amount of arcing may occur when connecting the internal batteries. This is normal
and will not harm personnel. Connect the cables quickly and firmly.
FIG.8
Connecting the UPS Internal Batteries
3. If you are installing EBPS, see the following section, “Connecting the EBP(s),” before continuing
with the UPS installation.
4. Replace the UPS front cover.
To replace the cover, verify the EBP cable is routed through the knockout on the bottom of the cover
if EBPs are installed.
Put the front cover hooks of side with display to the cover port, put another side to the other two
