Operation and Maintenance Manual
Second Edition
A Brand of Niuli
2
MAXITON GTJZ
Operation Of Safety Rules
Failure to obey the instructions and safety rules in this
manual will result in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe machine
operation contained in this operator's manual.
1 Avoid hazardous situations.
Know and understand the above principle before going on
to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended. You read,
understand and obey the manufacturer's instructions and
safety rules
—safety and operator's manuals and
machine decals.
You read, understand and obey employer's safety rules and
worksite regulations.
You read, understand and obey all applicable governmental
regulations.
You are properly trained to safely operate the machine.
Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Maintain safe distances from electrical power lines
and apparatus in accordance with applicable
governmental regulations and the following chart.
Voltage Minimum Safe
Phase to Phase Approach Distance
Meters
0 to 300V
Avoid Contacting
300V to 50KV 3.05
50KV to 200 KV 4.60
200KV to 350 KV 6.10
350 KV to 500 KV 7.62
500 KV to 750 KV 10.67
750 KV to 1000 KV 13.72
Allow for platform movement, electrical line sway
or sag and beware of strong or gusty winds.
Keep away from the machine if it contacts
energized power lines.Personnel on the ground or
in the platform must not touch or operate the
machine until energized power lines are shut off.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
Danger