Operation and Maintenance Manual
Second Edition
26
Maxiton GTJZ
B-15 Drive speed - stowed
B-16 Drive speed - raised or extended
B-17 Alarm package
B-18 Hydraulic oil analysis
Checklist C
Y N R
Refer to Table C
C-1 Hydraulic hose,pipeline,valve
Checklist D
Y N R
Refer to Table D
D-1 Boom wear pads
D-2 Free wheels
D-
3 Driving reducer’s oil
Checklist E
Refer to Table E
E-1 Hydraulic oil
Every two years
Table A Procedures A-1 Inspect the
Manuals
Maintaining the operator’s and safety manuals in good
condition is essential to safe machine operation.
Manuals are included with each machine and should
be stored in the container provided in the platform. An
illegible or missing manual will not provide safety and
operational information necessary for a safe operating
condition.
1 Check to be sure that the storage container is
present and in good condition.
2 Check to make sure that the operator's,
responsibilities and safety manuals are present and
complete in the storage container in the platform.
3 Examine the pages of each manual to be sure that
they are legible and in good condition.
4 Always return the manuals to the storage container
after use.
Contact your authorized Niuli
distributor or Niuli if replacement manuals are needed.
A-2 Inspect the Decals and Placards
Maintaining all of the safety and instructional decals
and placards in good condition is mandatory for safe
machine operation. Decals alert operators and
personnel to the many possible hazards associated
with using this machine. They also provide users with
operation and maintenance information. An illegible
decal will fail to alert personnel of a procedure or
hazard and could result in unsafe operating conditions.
1
Refer to the
Decals
section in the
GTJZ06/08/10/12/14
Operator's Manual
and use the
decal list and illustrations to determine that all decals
and placards are in place.
2 Inspect all decals for legibility and damage.
Replace any damaged or illegible decal immediately.
Contact your authorized Niuli
distributor or Niuli Industries if replacement decals are
needed.
A-3 Inspect for Damage and Loose
or Missing Parts
Daily machine condition inspections are essential to
safe machine operation and good machine
performance. Failure to locate and repair damage,
E-2 Check the wheel bearing
E-3 Check the oil tank hydraulic,lid,vents
Y N R
