Niuli Maxiton GTJZ Series Скачать руководство пользователя страница 34

Страница: 34 / 42

Operation and Maintenance Manual

Second Edition

Maxiton GTJZ

Result: The machine returns to low speed condition

6. Rotate the selector switch to the platform controller.

7.Press the machine high and low speed selection

button until the low speed (turtle symbol) is selected.

Result: The machine should become low speed

condition

8.Press the machine high and low speed selection

button until the high speed (rabbit symbol) is selected.

Result: The machine becomes high speed condition..

B-13 Test driving start the system

A suitable driving start system is essential for the safe

operation . Improperly driving start may make the

machine unsafe to move. When the boom rotates

beyond the end of the tire, the indicator will light and

the drive function will continue until the joystick returns

to the neutral position.

1.Start the machine from the platform controller.

2.Lower the boom to the loading position.

Result: The boom is illuminated at any position in the

area.

3. Move the drive joystick away from the center.

Result: The machine cannot drive.

5. Press the driving start button and slowly move the

joystick away from the center.

Result: The drive function is executed.

B-14 Test the drive brake

Proper brake function is essential to safe machine

operation. The drive function should respond quickly

and smoothly to operator control. Drive performance

should also be free of hesitation, jerking and unusual

noise over the entire proportionally controlled speed

range.The drive gears of machine comes with hydraulic

brakes.

Select a test area that is firm,

level and free of obstructions.

1. Create a line on the ground as reference.
2. Start the machine from the platform controls.
3.

4. Choose a point on the machine; i.e., contact patch

of a tire, as a visual reference for use

when crossing the start and finish lines.

5. Bring the machine to top drive speed before

reaching the test line. Release the joystick when the

reference point on the machine crosses the test line.

6 Measuring the distance between reference point to

test line after stop the machine.

Result: the brake distance should be between 0.3 and

0.5m.

B-15 Test the Drive Speed - Stowed

Position

Proper drive function movement is essential to safe

machine operation. The drive function should respond

quickly and smoothly to operator control. Drive

performance should also be free of hesitation, jerking

Содержание Maxiton GTJZ Series











































Результаты поиска

Содержание Maxiton GTJZ Series

Отзывы:

Похожие инструкции для Maxiton GTJZ Series

Бренды по названию

Популярные бренды

Niuli Maxiton GTJZ Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Maxiton GTJZ Series

Отзывы:

Похожие инструкции для Maxiton GTJZ Series

Бренды по названию

Популярные бренды