Operation and Maintenance Manual
Second Edition
22
Maxiton GTJZ
Workbench extensions by manual operation
Drive
functions are powered by a Long time work
power unit.Flow is 15L/min.
Electrical System
24V batteries are used for this system. Battery is used
to start the motor and drive the controllers. By external
storage battery charging alternating current.
Machine Controls
Two controller is used to control the machine function.
One is installed in chassis,and one is installed on the
platform.
Safety precautions
A series of proximity switches and mechanical limit
switches provide information to the controllers. These
proximity and mechanical switches maintain and
define the safe operating parameters of the
machine. Sensor status can not be changed
Scheduled Maintenance Procedures
Observe and Obey:
➢
Maintenance inspections shall be completed by a
person trained and qualified on the maintenance of
this machine.
➢
Scheduled maintenance inspections shall be
completed daily, quarterly, semi-annually, annually
and every 2 years as specified on the
Maintenance
Inspection Report.
WARNING
: Failure to perform each procedure as
presented and scheduled could
result in death, serious injury or
substantial damage.
➢
Immediately tag and remove from service a
damaged or malfunctioning machine.
➢
Repair any machine damage or malfunction before
operating the machine.
➢
Keep records on all inspections for three years.
➢
Machines that have been out of service for a
period longer than 3 months must complete the
quarterly inspection.
➢
Unless otherwise specified, perform each
maintenance procedure with the machine in the
following configuration:
1 Machine parked on a flat, level surface
2 Boom in stowed position
3 Extended platform spectfied position in the back.
4 Turntable secured with the turntable rotation lock
5
Key switch in the “OFF” position with the key
removed
6 Wheels chocked
➢
Before remove the lifter cylinder ,oil hose or any
part of body put in the boom, please place the
boom protection board as shown below
:
About This Section
This section contains detailed procedures for each
scheduled maintenance inspection. Each procedure
includes a description, safety warnings and step-by-
step instructions.
Symbols Legend
Safety alert symbol
—used to alert
personnel to potential personal injury
hazards. Obey all safety messages
that follow this symbol to avoid possible injury or
death.
Red! Used to indicate the
presence of an imminently hazardous situation which,if
not avoided, will result in death or serious injury.
Orange! used to indicate the
presence of a potentially hazardous situation which,if
not avoided, could result in death or serious injury.
Yellow with safety alert symbol!
used to indicate the presence of a potentially hazardous
situation which, if not avoided, may cause minor or
moderate injury.