Nitto CTS-02V4, Руководство пользователя

Страница: 35 / 37

Nitto Construction
- 35 -
・
Press or button for increase or decrease of the X axis in the cordinate (X, Y).
・
Press or button for increase or decrease of the Y axis in the cordinate (X, Y).
・
When pressing button at LOOKUP mode, it returs to the initial state.
※
In the specified coordinate number where the measured data has already existed, it is not
possible to measure newly or additionally.
7.3 Measurement
・
When selecting the arbitrary coordinate number that the measured data does not exist and
then pressing button, it becomes a waiting-for-measurement screen as shown in
Fig.7.3-1.
・
When screen becomes a state of waiting-for-measurement, the display will change from
LOOKUP mode (Fig.7.2-2) to MEAS mode (Fig.7.3-1). In this state you can start
hammering.
Fig.7.3-1 Waiting-For-Measurement Screen
・
The data will be renewed with each effective hammering. The strength index value (STR
value), the surface deterioration index value (INDX value) and the delamination index
value (STAT value) will be calculated and displayed in the screen. Fig.7.3-2 shows the
screen of display when first hammering is completed and Table 7.3-1 shows the list of the
items and its content.
Fig.7.3-2 Screen at First Hammering
Table 7.3-1 Items and Contents
Item Content
SITE Site number
PNT(***,***) Coordinate number
MN
Mean score of strength index value
recorded
N Number of measured data recorded
Current status
of instrument