Nitto CTS-02V4, Руководство пользователя

Страница: 22 / 37

Nitto Construction
- 22 -
Table 5.1-1 List of Button Name and its Function
No
．
Button Name Function
①
DATA Read To read the data recorded in CTS-02V4
②
DATA Copy To copy the data recorded in CTS-02V4 to the specified folder
③
Delete Site To delete the data recorded in CTS-02V4
④
Show Parameter To check the parameters at the time of measurement
⑤
Show Wave Form To show the waveform
⑥
Parameters Set To set the parameters
⑦
Timer Set To set the timer of CTS-02V4
⑧
Connect to
CTS-02V4
To connect CTS-02V4 to the PC
It will not be displayed when connected
⑨
Show Parameter To check the parameters set in CTS-02V4 at the present moment
⑩
Application Exit To exit the program
※
When unable to connect with CTS-02V4
・
Warning dialogue will be displayed as shown below (See Fig.5.1-2).
・
The program will exit when click [OK] button.
・
When click [
キャンセル
(cancel)] button, the initial screen will change a little and [Connect
to CTS02V4] button
⑧
will appeared in [SET UPCTS-02V4] list shown on the extreme
right.
Fig.5.1-2 Warning Dialog