Nitto CTS-02V4, Руководство пользователя

Страница: 34 / 37

Nitto Construction
- 34 -
7. Method of Measurement
7.1 Selection of SITE Number
・
In the initial state of CTS-02V4
、
press or button to select the SITE number for a
storage of the data.
・
When pressing button, SITE number will decrease, while pressing button, SITE
number will increase.
・
When the data was recorded in SITE, it will display as USED shown in Fig.7.1-1, while the
data was not recorded in SITE, it will display as EMPTY shown in Fig.7.1-2.
・
When SITE number is selected to use, press button.
・
Each SITE number contain X-Y coordinate of 128-by-128 and each measured data is
recorded in the selected SITE number. (One hundred of data can be recorded in each
coordinate number.
Fig.7.1-1 Example of Display for USED Fig.7.1-2 Example of Display for EMPTY
7.2 Selection of Coordinate Number and Confirmation of Data
・
When SITE number is selected, it becomes LOOKUP mode.
・
LOOKUP mode is a mode to read out the data recorded in CTS-02V4.
・
When the recorded data exists in the specified SITE number, the numbers of the measured
data and the mean score of the measured data are displayed as shown in Fig.7.2-1.
・
When the recorded data does not exist in the specified SITE number, the message of [Site
File creating] shows up and then the screen is displayed as shown in Fig.7.2-2.
Fig.7.2-1 Screen When Recorded Data exists
Fig.7.2.2 Screen When Recorded Data Does Not exist
Number of
Measured data
Mean score of
measured data
Current status
of instrument