Nitsuko NVM-2, Руководство пользователя

Страница: 56 / 57

Documentation Corrections to the NVM-2 Setup Guide
52 Issue 1-0
Instructions for Installing a 124i, Onyx VS or Businesscom DS01 Phone
System (cont’d)
Installing a 124i Phone System (Alternate Method)
Read the instructions next to
➍
below and look for
➍
on Figure 1.
Repeat for
➎
.
➍
Plug one end of a modular line cord into Voice Mail port 1 on the
NVM-2. Plug the other end into a modular jack. Connect the
modular jack to a port on the phone system.
➎
Repeat
➍
for Voice mail Port 2 (as well as 3 and 4) if installed.
IMPORTANT NOTE
Extension will receive notification of new messages (blinking
Message Waiting lights and interrupted dial tone for single line
phones) only if Voice Mail port 2 is connected to the Phone
System.
Figure 1: Connecting NVM-2 to a 124i Phone System