Nitsuko NVM-2, Руководство пользователя

Страница: 22 / 57

Getting Started
18 Issue 1-0
Starting Up the System Configuration Management Program
Starting up the System Configuration Management Program
automatically shuts down the Voice Mail System and loads a pre-
stored database of call/tone parameters for your phone system.
To start up the System Configuration Management Program:
1.
Connect the laptop computer or terminal to the console connector
on the Voice Mail using an RS-232 cable. See Figure 1. Use
either a null modem cable if you are connecting a laptop or a
straight-through cable if you are connecting a terminal. Make sure
the RS-232 cable has one of the pin-outs shown in Figure 2.
Note:
The laptop computer should be set at 38400 baud, 8 data
bits, 1 stop bit, no parity.
Figure 1: Connecting a Laptop Computer to the Voice Mail
25-pin to 25-pin Null Modem Cable
3
2
20
6
4
5
8
.
7 2
3
6
20
8
.
4
5
7
To Voice Mail To DTE Device
LINK
(25-pin) (25-pin)
9-pin to 25-pin Null Modem Cable 9-pin to 9-pin Null Modem Cable
9-pin to 25-pin Straight-Through Cable
2
3
4
6
7
8
1
.
5 2
3
4
6
7
8
1
.
5
2
3
4
6
7
8
1
5
2
3
6
20
8
.
4
5
7 3
2
6
4
1
.
7
8
5
3
2
20
6
4
5
8
7
To Voice Mail
(9-pin)
To Voice Mail
(9-pin)
To Voice Mail
(9-pin)
To DTE Device
(25-pin)
To DTE Device
(9-pin)
To DCE Device
(25-pin)
Figure 2: Required Pin-outs for the RS-232 Cable