Nitsuko NVM-2, Руководство пользователя

Страница: 41 / 57

Editing Parameters
Issue 1-0 37
Editing Global Parameters
If necessary, you can edit the Global Parameters system for the Voice
Mail System. You really shouldn't change the default values unless
advised by the Voice Mail dealer or manufacturer.
To edit Global Parameters:
1.
Start up the System Configuration Management Program (see
Chapter 1).
2.
From the Main Menu, type G and press Enter.
They system prompts with the following fields.
¾
Flash character in dialing strings
This field is the character that represents a hook flash.
DEFAULT
:
Depends on phone system
ENTRIES
:
&
NOTES
:
N/A
¾
ttdata duration of DTMF tones while outdialing
Duration of DTMF tones while outdialing.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
N/A
¾
flashtm Hook flash time
This is the length of a hook Flash.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-999 (1=10ms)
NOTES
:
N/A
¾
pausetm dial string pause duration
When “P” is used in a dialing string, this field determines the length of
the pause.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
For field that may use a pause, see
System Options: Lamp-
On string, Ringdown String, Transfer String, Lamp off
string
, and
Access digits before callout
¾
t_idd interdigit interval for DTMF dial out
This field is the duration between digits when dialing out.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
N/A