Nisca PR5350, Руководство по обслуживанию

Страница: 89 / 97

(2) SCSI/USB interface common error
Er LCD display
Contents Method to Recover
90
97
98
99
9A Unsupported
Print CMD Er- Ad Received Print
command is not
supported.
(
1
)
Check whether the
transmitted command is in
accordance with the
command specification.
(
2
)
Clear the error with
CLEAR key and transmit
the command again.
92 Printer is not
Ready. Er- Ad Read Magnetic Encode
command was received
while the printer
(
mechanical control
module
)
is not ready
(
1
)
Check whether the printer
is in ready condition
before transmitting the
Read Magnetic Encode
command.
(
2
)
Transmit the command
again after clearing
the error with "CLEAR"
key.
93 Print Command
Parameter Er-Ad Parameter of the
received Print
command is incorrect.
(
1
)
Check whether the Para-
meter is in accordance
with the specification.
(
2
)
Clear the error with
CLEAR key and transmit
the command again.
94 Multi Parameter
Received Er- Ad An error that received
Print
Command repeatedly
while receiving request
plural times to flip over.
(
1
)
Check weather the Print
command is transfer red
repeatedly to the same
memory when transferring
the request plural
times to flip over.
(
2
)
Clear the error with
CLEAR key and transmit
the command again.
95 Transfer Byte
Size Error. Er- Ad Actual number of
transmitted byte does not
match the designated
number of byte.
(
1
)
Check the designated
byte number of the
transmitted command and
the actual byte number.
(
2
)
Clear the error with
CLEAR key and transmit
the command again.
96 PreTransfer not
Completed. Er-
Ad The Print Data
Transferring
Command is received
while
not completed to receive
previous Print Data
Transferr ing Command
(
1
)
Check whether the Para-
meter is in accordance
with the specification.
(
2
)
Clear the error with
CLEAR key and transmit
the command again.