Nisca PR5350, Руководство по обслуживанию, Страница: 15 / 97

2
)
Setting internal SCSI Terminator.
The Printer has Active Terminator for SCSI-I and SCSI-II.
When using the Terminator, turn the switch at the back of the Printer ON
(
upper side
)
.
(
Turn OFF the power switch when operating this.
)
To switch on
To switch off
Appearance of Terminator switch
3
)
Setting SCSI ID Number
The SCSI ID number can be freely selected from 0 to 7 through the operation panel of
the printer.
Default ID setting is 4.
Note 1: Do not set the same ID number as the PC and other peripheral units.
(
It may
cause a trouble.
)
When setting, check the ID numbers of the other units.
Note 2: When setting the ID number, turn OFF the power switches of PC and all other
peripherals.