Nisca PR5350, Руководство по обслуживанию

Страница: 83 / 97

(
26
)
Card Jam error in Encoder
Card JAM. Encode
Area 08 Er -
Ad
Er Ad Symptom Check/Repair
77 ** Card jam error in the
Area08
(
SN15
)
while the
card is transported from
Encoder to F.Turn or from
F. T urn to Encoder.
(
1
)
Check that the card is staying in the
problem area. If no card, go to
(
*b
)
.
(
2a
)
After removing the staying card,
check the motion of PM2 in the
Actuator Check Mode. If normal,
clean the transport rollers of the
Encoder.
Check the transport roller working
normally.
If it does not work normally, replace the
Encoder.
(
3a
)
If PM2 does not work normally, check
connection and electrical contact of the
harness.
·
ASM-MOTOR
(
4a
)
If the harness connection is normal,
replace the following:
·
PM2
·
PBA-MAIN
(
2b
)
Check the reaction of SN15 in the
Sensor Check Mode.
(
3b
)
If SN15 does not react, check connection
and electrical contact of the
harness.
·
ASM-EN-RELAY
·
ASM-ENC
(
4b
)
If the harness connection is normal,
replace the following:
·
SN15
·
PBA-MAIN