Nisca PR5350, Руководство по обслуживанию

Страница: 29 / 97

*Action of Flip Turn unit (FT) rotation
F.Turn Ang(PM1) : Rotate FT to set direction
F_HOME : Forward phase at home position (supplying. HR. normal
ejection)
R_HOME : Reverse phase at home position (HR. normal ejection)
F_PRINT : Forward phase at print position (print. IC encoding)
R_PRINT : Reverse phase at print position (print. IC encoding)
F_ENCODE : Forward phase at encoding position (Mg. encoding, error
ejection)
R_ENCODE : Reverse phase at encoding position (Mg. encoding, error
e jection)
Clear key : stop
Exe key : start
*Action of card transportation rollers at FT
F.Turn Trf(PM1) : Activate the rollers in FT for limited time
CCW HDRV : High spee d (CCW, 300mm/s)
CW HDRV : High speed (CW, 300mm/s)
Clear key : stop
Exe key : start
*Action of card transportation roller at print block
Print Mtr.(PM) : Activate the rollers at print block in limited time
CCW HDRV : High speed (CCW, 300mm/s)
CW HDRV : High speed (CW, 300mm/s)
CCW LDRV : Low speed (CCW, 200mm/s)
Clear key : stop
Exe key : start
*Setting number of cards issued
Print Number : set the number of times for card transportation test.
Clear key : decrement number (min. 1)
Exe key : increment number (max. 100)
*Setting the pattern of card transportation action
Select Action :
Feeder -> Stack : Feeder
à
Normal eject
Feeder -> Reject : Feeder
à
Error eject
Feeder -> Print : Feeder
à
Print block
à
Normal eject
Clear key : N/A
Exe key : Selecting action pattern
Note : Must execute this menu without cards in the card hopper.
Note : Must execute this menu without cards in the card hopper.
Note : Must execute this menu without cards in the card hopper.