WindRunner™ self-balancing electric vehicle user manual
36
Display panel under normal mode(Rear LED off)
4.3 Lock mode
This mode is effective only after the WindRunner is started and under standby, or power assistant mode (note:
for safety reasons, it is unable to enter the lock mode under balance mode). Under standby mode or power
assistant mode, press
“lock” on the intelligent remote key to activate the lock mode. If touched or handled by
external force, its posture will change, and the whole mainframe of WindRunner shall strongly shake, give the
alarm buzz, the tires will lock up, and will be difficult to tract.
If the WindRunner is under this working mode for more than 12h
or if the battery capacity is approximately used up, the system
shall be powered off automatically.