WindRunner™ self-balancing electric vehicle user manual
32
The built-in intelligent system of WindRunner shall try to ensure
the driver’s safety. However, it cannot ensure to solve problems
associated with long-time overload, over-temperature, low
battery stamina, wheel skidding, etc. Under balance mode, the
WindRunner may begin to shake and alarm, if the driver pays no
attention, within a few seconds, it may be changed to standby
mode and cut off the power output. Just then if the driver is still
on the WindRunner, the driver may crash and get injured.
3.4 Lock mode
The lock mode is a security function of WindRunner under the power on state for temporary short parking to
protect it against traction by others. Under the power on state, press
“lock” on the intelligent remote key to
enter the lock mode. After locked up, press
“ON/OFF” button to unlock.
All above mentioned working modes shall be further detailed in
the next chapters. The driver may progressively find out the
features of all working modes during the riding test and make a
good using.