WindRunner™ self-balancing electric vehicle user’s manual
75
Wash the tire and fender with a household shower or water pipe, but avoid direct spraying to the mainframe.
After washed, leach and dry as soon as possible, store the WindRunner in a well-ventilated place to dry. This will
protect some steel component parts against rust.
Remove the foot mat and wash it with clean water.
When cleaning the WindRunner, ensure that the WindRunner is
powered-off, and charging cable is detached, and the charge port
is tightly covered by the rubber cap! Otherwise you may suffer an
electric shock or serious troubles.
It is strictly forbidden to directly spray and wash the WindRunner
with a water hose and head used for washing car. Do not wholly
soak the WindRunner in water. This may cause serious damage
due to the moisture or water accumulated inside it.
8.2 Check whether the screw is loose or not
Periodically check the assemblies such as hub, operating bar, battery pack, fender, and housing of display
panel etc. Shake lightly to observe whether the assembly is shaking or loose; if loose, please check the
corresponding screws, and retighten with the accompanied tools.
