12/2017
A - 61
56091204 - Nilfisk Liberty SC50
ENGLISH - A
INSTRUCTIONS FOR USE
6/2020
FAULT CODE DISPLAY
Any fault codes detected by the controllers will be displayed on the control panel display as they occur. If more than one fault exists, the display will sequence
through the fault codes. The fault code will display across the top of the screen.
Fault codes are displayed as follows;
● Fault Code
(X1a)
will appear in the Display Header
(X1)
●
Brief description of the error will appear in the center of the screen (some descriptions will have two screens of information that will toggle every four
seconds)
● The Fault Indicator will appear on the right of the screen
● For non-critical faults the operator can exit the fault screen (shown in the Display Footer
(X2)
), for critical faults the technician can navigate to the menu to
troubleshoot the error.
X1a Active Fault Code
X2 Display Footer
X14 Fault Indicator
path & resume. Record
exit
FAULT 5-F455
Drive machine back on
new plan if it
persists
the permitted
exit
FAULT 5-F455
Machine is outside
cleaning area
X14
X1a
X2
