Nikon DTM-302 Series, Инструкция по эксплуатации

Страница: 61 / 222

Getting Started 3
Total Station DTM-302 Series Instruction Manual 43
Entering a new point
When you input a new point name or number, a
coordinate input screen appears. Enter the point’s
coordinates in NE, NEZ, or elevation-only (Z)
format.
Press [ENT] on the last line (the CD field) to store
the point in the current job.
Pressing
[ENT]
without a point name
To use a point without recording the coordinates,
press
[ENT] in a PT field, without entering a point
name.
The input coordinates are used in the calculation.
They are not saved in the database.
Specifying a wildcard (*)
If you include an asterisk (*) when you enter a
point or code name, a list of points that match the
entered text is displayed.
Use [^] or [v] to move the cursor to the point that
you want to use. Then press [ENT] .
If the Page Up or Page Down icons are
displayed, use
[<] or [>] to page up or page down
the list.