Nikon DTM-302 Series, Инструкция по эксплуатации

Страница: 45 / 222

Getting Started 3
Total Station DTM-302 Series Instruction Manual 27
Records measured data, moves on to the next screen,
or confirms and accepts the entered data in input mode.
You have the option to record the measurement as a CP
record instead of an SS record, if you hold this key down
for one second in the Basic Measurement Screen
(BMS).
The instrument outputs the current measurement data
(PT, HA, VA, and SD) on the COM port if you press this
key in the BMS or in a Stakeout observation screen.
(The Data Rec settings must be set to COM.) page 95
Returns to the previous screen.
In numeric or alphanumeric mode, deletes input.
Starts distance measurement, using the measure mode
settings for the
[MSR1]
key.
Displays measurement mode settings, if held down for
one second.
page 51
Starts distance measurement, using the measure mode
settings for the
[MSR2]
key.
Displays measurement mode settings, if held down for
one second.
page 51
Moves to the next available display screen.
Changes the fields that appear on the DSP1, DSP2,
and DSP3 screens, if held down for one second. page 54
Displays the Angle menu. page 56
Displays the Station Setup menu.
In numeric mode, enters 7. In alphanumeric mode,
enters A, B, C, or 7. page 58
Displays the Stakeout menu.
Shows stakeout settings, if held down for one second.
In numeric mode, enters 8. In alphanumeric mode,
enters D, E, F, or 8. page 73
Table 3.1 Key functions (continued)
Key Function Details