Nikon DTM-302 Series, Инструкция по эксплуатации

Страница: 50 / 222

3 Getting Started
32 Total Station DTM-302 Series Instruction Manual
For example, if the DSP2 screen is currently
displayed, press
[DSP] to move to the DSP3 screen.
The screen indicator changes from
2/4
to
3/4
.
Customizing items in the Basic Measurement Screen (BMS)
To customize the items that are displayed on the DSP1, DSP2, and DSP3 screens:
1. Hold down [DSP] for one second.
2.
Use the arrow keys [^] , [v] , [<] , and [>] to
highlight the item that you want to change.
3. Use the and softkeys to scroll through the
list of items that can be displayed for this item.
The items that you can choose from are HA,
AZ, HL, VA, V%, SD, VD, HD, Z, and (none).
4. To save your changes, press the
Save
softkey. Alternatively, highlight the last
item for DSP3 and press [ENT] . The DSP screens show the items you have
selected.
When the secondary distance unit is set, an
additional screen is available. It shows the HD,
VD, and SD values. For information on setting the
secondary distance unit, see page 132.
The smallest unit of display for distances
measured in feet-and-inches is 1/16 in. Smaller
units are impractical in the field. When the actual
value is greater than 99999'11''15/16, the “>”
symbol is shown. If the actual distance is less than -9999'11''15/16, the “
`
” (solid
triangle) symbol is shown. This does not affect calculations. The precise value is
used internally in all cases.
Except for the (none) item, you cannot display the same item on more than one line
of the same screen.
The items displayed in the DSP1, DSP2, DSP3, and DSP4 screens are also used in
the corresponding Stakeout screens (SO2, SO3, SO4, and SO5).
You can also customize the displayed items in Stakeout.