Nidek Medical LE-9000LX, Руководство оператора

Страница: 96 / 145

5 - 9
5.4.1 When the edger is not connected to the barcode scanner
The internal memory built in the standard type of the instrument can store and manage the traced outline
and lens layout data of 100 sets of frame.
<Storing method>
1. Perform tracing.
2. Call up a traced outline to the display with .
3. Input each data of layout data if necessary.
4. Align the cursor ( ) to “MEM” with .
5. Select the memory address
*2
from 001 to 100
range with or .
An indication of the address whose data has
already been stored is reversed.
6. Press to store data such as traced
outline, lens layout, lens material, frame
type, processing mode, and polishing (on/
off).
<Method for calling up>
To call up the traced outline only, set the “11) Layout memory” parameter to “None” in advance (see p.
5-4).
1. Align the cursor to “MEM” with .
2. Select the memory address with or .
An indication of the address whose data has already been stored is reversed.
3. Hold down until the instrument produces two beeps.
The traced outline will appear on the Layout display.
*2 Memory address shows the data address at which the traced data and layout data are stored. If
you store a new data at the address, at which data has been already stored, the former data will
be erased.
㧚ޓ
㧚ޓ
ޓ㧚
㧚ޓ
㧹㧵㧺ޓޓ㧢㧡
㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧰ޓ㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ
ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ
㧿㧵㨆㧦ޓ㧜㧞㧜ޓޓޓޓޓޓޓޓ
㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ
㧹㧱㧹 㧦ޓ㧝㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧸㧭㧺㨅㧸ޓޓޓ㧼㧻㧸ޓޓ㧾
Memory address