Nidek Medical LE-9000LX, Руководство оператора

Страница: 90 / 145

5 - 3
[Parameter items and the setting contents]
1) Size preset (PLA, MTL) : ±
F
.
FF
2) Size preset (PLA, CEL or ZYL) : ±
F
.
FF
3) Size preset (GLS, MTL) : ±
F
.
FF
(not function for Type PLB)
4) Size preset (GLS, CEL or ZYL) : ±
F
.
FF
(not function for Type PLB)
Factory setting: +0.00 [mm]
Initial settings of size corrective value for each combination of lens material and frame material.
(Available setting value: –9.95 - +9.95)
Lens materials such as high index plastic, polycarbonate, acrylic resin, and trivex are
regarded here as plastic.
5) Initial value of FPD : ±
FF
.
F
Factory setting: +70.0 [mm]
Sets the initial FPD value.
6) Initial value of PD : ±
FF
.
F
Factory setting: +62.0 [mm]
Sets the initial PD value.
Press
or to input any PD value. The set value appears first on the Layout
display.
7) Layout preset : ±
FF
.
F
Factory setting: +2.0 [mm]
Presets the height of the optical center. Set the value as the height of the optical center from the
rim center. When inputting each data of the lens layout, this value is automatically set at
(could be PD or BT ). This setting is not effective for eye point layout.
8) Measure in flat edge : None, Exec
Factory setting: Exec
Selects whether to measure the lens shape during flat (rimless) edging. When “Exec” is se-
lected, the lens shape will be measured (front surface only) before roughing to check if the lens
size is enough.
Lenses can be edged without measuring the lens shape by selecting “None”.
9) Grind by mirror image : R, L
Factory setting: R
When both rims are traced, the mirror image of right or left rim, will be used as the lens
shape data of the other side. This parameter decides which is the base side (right or left).
In spite that shape is mirrored, the size (circumference) will not be mirrored, but comply
with the outline for the respective side.