Nidek Medical LE-9000LX, Руководство оператора

Страница: 56 / 145

4 - 24
m m
m m
m
o o o o o
Roughing wheel for plastic lens
NOTE
• Be sure to move a glass lens within the roughing wheel for glass lenses.
If the glass lens contacts the other wheels, it may damage the wheels or the glass lens may
crack.
• The adjusted contact position with the wheel is effective only during roughing of one
lens. After the lens processing is over, the contact position with the wheel will return to
its original position.
• Setting the “Reverse GLS Grind” parameter to “Exec” roughly processes a lens by
automatically changing the position to be contacted with the roughing wheel from side to
side. In such a case, the position to be contacted cannot be changed with
or .
B. It is possible to adjust the plastic lens contact position laterally during the roughing.
If the sharply-warped or high minus plastic lens is detached from the roughing wheel, change
the position where the plastic lens contacts the roughing wheel.
To adjust the contact position, press or
during roughing.
: The contact position with the wheel will
shift to the right.
: The contact position with the wheel will
shift to the left.
NOTE
• The adjusted contact position with the wheel is effective only in the roughing of one lens.
After the lens processing is over, the contact position with the wheel will return to its
original position.
5. Take the finished lens off.
1) Open the soundproof cover.
2) Press to remove the lens.
WARNING
• Open the soundproof cover after making sure that the wheels have come to a complete stop.
• Release the chuck by pressing after making sure that the wheels come to a complete
stop.
If the chuck is released before the wheels have not stopped completely and a lens is
dropped, it may contact the turning wheels and its scattering may cause injury.