Nidek Medical LE-9000LX, Руководство оператора

Страница: 95 / 145

5 - 8
5.4 Storing and Calling Up the Traced Data
The edger is provided with a memory function, which stores traced data and lens layout data in its
memory and calls them up whenever necessary. By storing a repetitive lens outline as a standard data
and calling it up with the function, an operator does not have to trace the same lens for each edging and
can save required time for lens processing. Besides, even though a frame is not handy, it is possible to
process the lens as soon as it is ready to be processed. The memory holds up to 100 sets of the traced
and layout data at most. The use of an optional barcode scanner extends the storable number of data
up to 500 sets of data.
CAUTION
• When a lens is edged by the data called up from the memory, perform it after checking
the traced outline on the display.
When the called data is abnormal, the error code (Error 0906) will appear. Restore
the data without edging.
NOTE
• Concurrent use of communication function and memory function is impossible. Only
when “Ext. interface” is set to “None”, the memory function becomes available.
• The stored data is battery-protected even though the power is turned OFF.
Since this battery is a rechargeable type, the battery becomes empty and the stored
data may be gone if the instrument is not used for a long time (about one month) or
soon after the instrument is purchased. In this case, turn ON the power of the main
body and charge the battery. For full-charging, it is necessary to keep powering ON
for 15 hours.
If the power is supplied to the instrument for one hour or more everyday after full-
charging, the battery becomes almost fully charged. If the instrument is used for a
short time, keep the power of the instrument ON for several hours once a month.