manualshive.com logo in svg

Nidek Medical ARK-1S, Руководство оператора, Страница: 92 / 112

Поделиться
Скачать
Nidek Medical ARK-1S Скачать руководство пользователя страница 92

86

DEVICE SETTINGS AND MAINTENANCE: Device Parameter Settings

●

Chart to be initially displayed (when “AUTO” is selected)

The measurement starting chart of uncorrected visual acuity measurement is calculated from AR values.

When cylindrical power is contained, -CYL is added to the spherical power.
When no AR data is contained, a full VA chart (VA 0.1 to 1.25) is displayed. AR measurements in the

table are values converted into 0.25 increments.

●

READER (Barcode scanner / Magnetic card reader function)

●

Checking the setting conditions in the ID field

When a barcode is read by the barcode scanner after setting, the read results under the set con-

ditions are displayed in the ID field. If anything other than alphanumeric characters, space, minus

sign, or underbar is entered, ~ (tilde) is displayed. Control codes are not displayed.

AR measured value 

(D)

Chart to be presented 

(Decimal display)

Chart to be presented 

(Fraction display)

-0.25 

≤

1.25

16

-0.50

1.0

20

-0.75 to -1.00

0.8

25

-1.25

0.63

30

-1.50

0.5

40

-1.75

0.4

50

-2.00

0.32

60

-2.25 to -3.00

0.25

80

-3.25 

≥

< 0.1

> 200

99. ADD SELECT
(Addition power)

0.25D / 0.50D / 0.75D / 1.00D / 1.25D / 1.50D / 1.75D / 2.00D

Selects the addition power added by pressing the ADD

 button in near vision 

measurement mode.

100. GLARE CHART
(Glare chart)

CHANGE / STAY

Chart to be presented when the screen switches to the contrast/glare visual acuity 

measurement.

CHANGE

: A VA chart one level lower is presented

STAY

: A VA chart at the same level is presented.

Parameter option

Setting contents

101. READER START
(Position to start reading)

1 to 250

Sets the position to start reading ID when the magnetic card reader is used.

Control codes are included in the number of characters. Set “1” when the barcode 

scanner is used.

102. READER LENGTH
(Length of reading)

1 to 14

Sets the length of data to be read as ID when the magnetic card reader is used.

This reads the set length of data or reads up to the return code. Control codes are 

not included in the number of characters. Set “14” when the barcode scanner is 

used.

Change

Normal display

All data display

㹎㸿㹐㸿㹋㹃㹒㹃㹐ࠉࠉ㹑㹃㹒㹒㹇㹌㹅
ࠉࠉࠉࠉࠉ㹙㹐㹃㸿㹂㹃㹐㹛

㸯㸮㸯㹐㹃㸿㹂㹃㹐ࠉ㹑㹒㸿㹐㹒ࠉࠉࠉࠉࠉࠉࠉ㸯
㸯㸮㸰㹐㹃㸿㹂㹃㹐ࠉ㹊㹃㹌㹅㹒㹆ࠉࠉࠉࠉࠉ㸯㸲

ࠉࠉࠉࠉࠉ㹇㹂㸸

ࠉ㹆㹭㹱㹮㹇㹂ࠉ㹈㸿㹌㸮㸯㸯

㹼ࠉࠉࠉࠉࠉࠉ㹼

ᵏ

㹎㸿㹐㸿㹋㹃㹒㹃㹐ࠉࠉ㹑㹃㹒㹒㹇㹌㹅
ࠉࠉࠉࠉࠉ㹙㹐㹃㸿㹂㹃㹐㹛

㸯㸮㸯㹐㹃㸿㹂㹃㹐ࠉ㹑㹒㸿㹐㹒ࠉࠉࠉࠉࠉࠉࠉ㸯
㸯㸮㸰㹐㹃㸿㹂㹃㹐ࠉ㹊㹃㹌㹅㹒㹆ࠉࠉࠉࠉࠉ㸯㸲

ࠉࠉࠉࠉࠉ㸿㹊㹊㸸

ࠉ㸭㹆㹭㹱㹮㹇㹂㹜㹈㹎㹌㸮㸯㸯㸮㸰㸮㸯㸮㸮㸮㸰㸰㸭
㹎㹒㹇㹂㹜㸯㸭㹎㹒㹌㹓㹋㹜㸴㸮㸶㸲㸱ࠉࠉ㸭㹆㹭㹱㹮
㹇㹂㹜㹈㹎㹌㸮㸯㸯㸮㸰㸮㸯㸮㸮㸮㸰㸰㸭㹎㹒㹇㹂㹜㸯
㸭㹎㹒㹌㹓㹋㹜㸴㸮㸶㸲㸱
ࠉ㹜㸟㸨㸡㸢㸣̓㸸㸼㸺㹼㸪㸫㸬㸭㸮㸯㸰㸱㸲㸳㸴㸵㸶
㸷㸩㸹㸺㹜㸼㸽͇㸿㹀㹁㹂㹃㹄㹅㹆㹇㹈㹉㹊㹋㹌㹍㹎㹏
㹐㹑㹒㹓㹔㹕㹖㹗㹘͂㹹㸤㸻

ᵏ

Содержание ARK-1S

















































































































Отзывы:

Нет отзывов