manualshive.com logo in svg

Nidek Medical ARK-1S, Руководство оператора

Поделиться
Скачать
Nidek Medical ARK-1S Скачать руководство пользователя страница 109

103

SPECIFICATIONS AND TECHNICAL INFORMATION: EMC (Electromagnetic Compatibility)

5.3

EMC (Electromagnetic Compatibility)

The device complies with the International Electrotechnical Commission standards (IEC 60601-1-2:
2007) for electromagnetic compatibility as listed in the tables below. Follow the guidance in the tables
for use of the device in an electromagnetic environment.

O

Specified cable

O

Essential performance

࡮

Objective refraction function

࡮

Keratometry measurement function

WARNING

•

Use the specified accessories, optional accessories, and cables.
Otherwise increased emissions or decreased immunity of the device may result.

•

Do not use the device near, on, or under other electronic equipment.

CAUTION

•

The device needs special precautions regarding EMC.
The device needs to be installed and used in accordance with the EMC information provided in this
manual.

•

Portable and mobile RF communications equipment can affect the device.

Part name

Connector 

Shielded

Cable Shielded

Ferrite Core

Length (m)

Power cord (100 V)

No

No

No

2.5

Power cord (230 / 240 V)

No

No

No

2.5

LAN cable

Yes

No

No

5.0

USB card reader cable

Yes

Yes

No

2.0

RS-232 cable

Yes

Yes

No

5.0

Содержание ARK-1S

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды