Nidek Medical ARK-1S страница 56 Скачать руководство пользователя

Страница: 56 / 112

OPERATING PROCEDURE: Accommodation Measurement

Press the graph

button to display the graph

display screen.

The detailed graph, accommodation

, maximum&minimum

AR-measured values, and maximum&minimum pupil size val-
ues are displayed.
The horizontal axis indicates the elapsed time in one-second
increments.

Press the graph

button to return to the accommodation measurement screen.

Switch the eye to be measured and measure the other eye in the same manner.

Graph display screen

*1. Accommodation increments is set by the “131. STEP” parameter independent from the display increments of the AR-measured

values.

ᵏ

$&&2002'$7,21

㸫㸷

㸷㸬㸯㸯

㸬㸯㸯

㸫㸯

㸯㸬㸴㸵

㸬㸴㸵

㸲㸬㸱

㸴㸬㸲

ᵘᵁᵚ

ᵘííᵚ

ᴴᴫᴱᴱ

• “ACC (accommodation)”, AR-measured “MIN (minimum value)”, “MAX (maximum value)”, pupil size

“MIN (minimum value)”, and “MAX (maximum value)” are printed out as measured results.

The greatest minus AR-measured value indicates “MAX (maximum value)”.

• To print the graph, set the “58. ACC GRAPH PRINT” parameter.

Accommodation (D)

Maximum AR-measured value (D)

Minimum AR-measured value (D)

Maximum pupil size (mm)

Minimum pupil size (mm)

Pupil size graph

Graph indicating chart position (TPOS)

Graph indicating change in AR-
measured values
(Accommodation graph)

•

Graph display of pupil size and AR-measured values
Interruptions on the graph indicate there were times that no measurement was obtained due to
blinking, alignment error, or such during measurement.

ᵏ

$&&2002'$7,21

㸫㸷㸬㸯㸯

㸯㸯

㸫㸯㸬㸴㸵

㸴㸵

㸲㸬㸱

㸴㸬㸲

ᵘᵁᵚ

ᵘííᵚ

ᴴᴫᴱᴱ

Содержание ARK-1S

















































































































Результаты поиска

Содержание ARK-1S

Отзывы:

Похожие инструкции для ARK-1S

Бренды по названию

Популярные бренды

Nidek Medical ARK-1S, Руководство оператора

Результаты поиска

Содержание ARK-1S

Отзывы:

Похожие инструкции для ARK-1S

Бренды по названию

Популярные бренды