Nidek Medical ARK-1S, Руководство оператора

Страница: 63 / 112

57
OPERATING PROCEDURE: Sagittal Measurement
3.9 Sagittal Measurement
Set the “81. SAGITTAL” parameter to “YES” in advance. When the “31. PRINT” is set to “AUTO”,
reset it to “MANUAL”.
1
As soon as KM-measured values are obtained, the
SAG icon is displayed. Press the SAG but-
ton to display the sagittal measurement screen.
Indications of “U (Up)”, “R (Right)”, “D (Down)”, and “L (Left)”
are displayed on the screen. The blinking “L (Left)” indication
shows the position of the illuminated fixation target viewed by
the patient.
2
Instruct the patient to look at the green light on the left without moving their head.
3
Manipulate the joystick up, down, right, or left to
position the target within the mire ring.
4
Manipulate the joystick forward or backward until
the mire ring is focused.
ᵏ
㹐㸸㸱ࠉ㸦㸷㸧ࠉ㹉㸸㸱 㹐㸸㸱ࠉ㸦㸷㸧ࠉ㹉㸸㸱
㹑㸫ࠉ㸯 㹑㸫ࠉ㸯㸬㸰㸳ࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱 㸰㸳ࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱
㹁㸫ࠉ㸮 㹁㸫ࠉ㸮㸬㸵㸳ࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱 㸵㸳ࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱
㸿ࠉࠉࠉࠉࠉ㸰 㸿ࠉࠉࠉࠉࠉ㸰
ࠓ),1,6+ࠔ
6$*
ᵏ
ࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹑 ࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹑
ࠉࠉࠉࠉࠉࠉࠉ ࠉࠉࠉࠉࠉࠉࠉࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱 ࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱
ࠉࠉࠉࠉࠉࠉࠉ ࠉࠉࠉࠉࠉࠉࠉࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱 ࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱
6$*,77$/
8
/
'
5
• The latest KM-measured values are displayed on the screen.
• To exit from sagittal measurement mode, press the return button.
ᵏ
ࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹑 ࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹑
ࠉࠉࠉࠉࠉࠉࠉ ࠉࠉࠉࠉࠉࠉࠉࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱 ࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱
ࠉࠉࠉࠉࠉࠉࠉ ࠉࠉࠉࠉࠉࠉࠉࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱 ࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱
6$*,77$/
8
/
'
5