Nice HySecurity SlideSmart DC Series Скачать руководство пользователя страница 5

Страница: 5 / 136

INTRODUCING SLIDESMART DC

Thank you for purchasing our premium SlideSmart DC™ slide gate operator. At HySecurity® Gate, Inc.,

we pride ourselves on quality. Our new line of electromechanical gate operators include a number of

unparalleled user bene

ts:

Robust -

An especially low

ex, corrosion resistant, steel chassis combines with an attractive, key-locked,

fade resistant, roto-molded cover. The components on the Smart DC Controller™ are protected by

opto-isolators which shield them from power surges and lightning strikes.

Power -

The Smart DC Controller provides variable speed control to a powerful, continuous duty

24V DC motor which drives the gearbox. The electronics, motor and gear box are rated to operate in

temperatures that range from -13°F to 158°F (-25°C to 70°C). SlideSmart DC 15 is rated for gates up

to 40 feet long and 1,500 pounds (12m and 682kg). SlideSmart DC 10F is rate for gates up to 40ft and

1,000lbs. (12m and 454kg). Solar options are available for both models.

Finesse -

A variable rate of gate acceleration and deceleration, dependent upon gate weight and length,

assures very smooth handling.

UPS backup and Solar ready -

Two 12V, 8 amp hour (Ah) batteries will provide a fully functional gate

operator (up to 4000ft/1219m of gate travel) when AC power is unavailable. Four user-selectable UPS

modes are available. 12VDC and 24VDC are available to power accessory controls. An optional base

extension is available that provides space for the optional 50Ah batteries which support solar applications

or usage during extended power outages.

INTELLIGENT FEATURES: SMART DC CONTROLLER

Menus and User relays -

The Smart DC Controller has over 55 menu items to allow installer con

guration

of gate function and two user relays, which can be con

gured for over 30 different functions.

Independent adjustment for open and close gate speeds -

An easy-to-use menu on the Smart DC

Controller allows the installer to vary the open and close speed settings.

Intelligent Inherent Entrapment Sensor (IES) -

Any impediment to gate travel is sensed by the system,

stopping gate movement per UL 325 Safety Standards. The intelligent system monitors gate power then

adapts the IES to trip at an adjustable threshold above normal power.

Improved Liquid Crystal Display (LCD) -

A 32-character LCD provides increased readability for

programming and troubleshooting.

USB communications port -

A direct connect provides accessibility to download system diagnostics

and upload system con

gurations using the Smart Touch Analyze and Retrieve Tool (START) software.

START software and diagnostics -

With START software loaded on a laptop computer, you can get

the latest software upgrade and have an invaluable troubleshooting tool for all HySecurity operators.

To download this free software, visit the HySecurity website at www.hysecurity.com.

TECHNICAL SUPPORT

For technical support, call your installer or authorized HySecurity distributor. Obtain the serial number

of your operator before calling. Refer to

SlideSmart Components

on the front page. For the name of a

distributor near you, call HySecurity at 800-321-9947.
For information about HySecurity training for installers, maintenance personnel and end users, refer to

the company website at www.hysecurity.com or call 800-321-9947.

SlideSmart DC Programming and Operations

hysecurity.com | 800-321-9947

Содержание SlideSmart DC Series









































































































































Результаты поиска

Содержание SlideSmart DC Series

Отзывы:

Бренды по названию

Популярные бренды

Nice HySecurity SlideSmart DC Series, Инструкция по установке и программированию

Результаты поиска

Содержание SlideSmart DC Series

Отзывы:

Бренды по названию

Популярные бренды