NHRC-10 User Guide
Copyright
1999, 2000, 2001, NHRC LLC. All Rights Reserved.
Page 61
5.11.3 Record a message
To record a message, enter the following command:
<prefix>*
where:
<prefix>
is the voice mailbox prefix as programmed by the repeater
operator.
The controller will say “record message header.” The user should transmit a brief
description of the message, who it is for, what it is about, etc. The message header can
hold up to eight seconds of speech. The controller will then say “record mailbox
message.” The user should now transmit the message to be recorded. The mailbox
message can be up to 32 seconds. After the message is recorded, the controller will say
“OK.”
5.11.4 Delete the last message played
The last message played can be deleted by sending the following command:
<prefix>**
where:
<prefix>
is the voice mailbox prefix as programmed by the repeater
operator.
The controller will respond with “OK.”
5.11.5 Perform an audio check
The audio check feature can be accessed with the voice mailbox prefix as follows:
<prefix>***
where:
<prefix>
is the voice mailbox prefix as programmed by the repeater
operator.
See Section 5.10 for more information on the audio check feature.
