NF CA5350, Инструкция по эксплуатации

Страница: 85 / 110

5.6 Description of Individual Commands
CA5350 5-18

U0
– Queries of CA5350 Setting
Description: Output for the
CA5350
setting.
Response message:
C A 5 3 5 0 A 0 B 0 C 0 H 2 1 I0 J 0 K 0 M 0 0 1 N 2 P 1 R 0 9 S 0 5 T . W 0 Y 3 Z 0 < t e r m >
(1) Device model
"CA5350"
Fixed
(2) LCD backlight brightness Refer to
A
command
(3) Bias voltage ON, OFF Refer to
B
command
(4) Zero Check ON, OFF Refer to
C
command
(5) Key last pressed Refer to
H
command
(6) Input connector Front, Rear Refer to
I
command
(7) Self-check results
0 : Passed the check
1 : ROM error
2 : RAM error
3 : ROM error and RAM error
4 : NVRAM error
(8) EOI and
X
Command Hold OFF Setting Refer to
K
command
(9)
SRQ
mask Refer to
M
command
(10) Current suppression ON, OFF Refer to
N
command
(11) Filter ON, OFF Refer to
P
command
(12) I/V gain Refer to
R
command
(13) Auto Current Suppression
0 : Auto OFF (manual)
1 : Auto ON
(14) Current Suppression range Refer to
S
command
When in Auto mode, range that is actually set will be output.
(15) Filter setting Refer to
T
command
(16) Output amplifier gain setting Refer to
W
command
(17) Message terminator Refer to
Y
command
(18) Auto filter ON, OFF Refer to
Z
command
Remarks: Meanings of numerical value match with the corresponding remote
control parameters. Refer to the description of each command for more
details.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(19)
(18)