NF CA5350, Инструкция по эксплуатации

Страница: 39 / 110

3.2 Display at Power
“ON” and Initial Setting
CA5350 3-5
3.2.2 Initialization
CA5350
is reset to the factory default settings in the following cases:

At the time of shipment from factory
All settings are initial values.

When setting in memory number 0 is recalled
In setting memory No. 0, factory default settings are stored. However, the contents of
setting memory No.1 ~ No.9 will not changed.

When an abnormal error is found in the backup settings at power-on
All setting memories (memory No. 1 ~ 9) are reset to the factory default state.
Table 3-1 Setting items and initial values list
Setting items Parameter range Initial values
<LCD adjustment>
Backlight brightness 0, 1, 2 2
< Input select>
Input select FRONT, REAR FRONT
<Gains>
I/V Gain [V/A] 10k, 100k, 1M, 10M, 100M,
1G, 10G 10k
×10 Gain ×1, ×10 ×1
<Filter>
Filter ON
，
OFF ON
Auto filter
AUTO
，
MANUAL
AUTO
Rise time 1µs, 3µs, 10µs, 30µs,
100µs, 300µs, 1ms, 3ms,
10ms, 30ms, 100ms, 300ms 10µs
< Current suppression>
Current suppression
ON
，
OFF
OFF
Range ±8nA, ±80nA, ±800nA,
±8µA, ±80µA, ±800µA ±800µA
Current
±(0
～
800.0µA)
000.0µA
<Voltage bias>
Voltage bias ON
，
OFF OFF
Bias voltage -8.000
～
+8.000V 0.000V
<Zero check>
Zero check ON, OFF ON
<Remote control>
GPIB address 0
～
30 2