Nexxt Solutions - NexxtGate Wireless Access Point
23
3. If you choose PPPoE, you should enter the following parameters as shown in Figure 4-7.
Note:
Only when you have configured the system time on the
System Tools
->
Time page
, the Time-based
Connection will take effect.
•
•
•
•
User Name/Password
- Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Connect on Demand
- You can configure the router to disconnect your Internet connection after
a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the router to automatically re-establish your con-
nection as soon as you attempt to access the Internet again. If you wish to activate Connect
on Demand, click the radio button. If you want your Internet connection to remain active at all
times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to
have elapsed before your Internet connection terminates.
Caution
: Sometimes the connection cannot be terminated despite your setting of the “Max Idle
Time” interval. This is due to some applications are continually linked to the internet in the
background.
Connect Automatically
: The connection can be re-established automatically after being disabled.
Time-based Connection
- The connection will only be established within the period ranging from
the start time to the end time (both are in HH:MM format) you specify in the Period of Time
field.
Figure 4-7 WAN - PPPoE
