Nexxt NexxtGate, Руководство пользователя

Страница: 33 / 80

Nexxt Solutions - NexxtGate Wireless Access Point
33
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B.
Enter a short description of the wireless station in the Description field. For example:
Wireless station A.
Privilege - Select the privileges for this entry, either Allow or Deny .
Status - Select Enabled or Disabled as the status for this entry, from the Status pull-down list.
Click the Save button to confirm this entry.
Click the Modify button next to the entry you want to change. If you want to erase the entry,
click on the Delete in this step.
Proceed with the changes you want to make.
Click the Save button.
Click the
Enable
button to enable this function.
Select the radio button:
Deny the stations not specified by any enabled entries in the list to
access
for Filtering Rules.
Delete all or disable all entries, if there are any entries already.
Click the
Add New
... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC
Address field, enter wireless station A in the Description field, select
Allow
in the Privilege
pull-down list and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button at the end.
Click the
Add New
... button and enter the MAC address 00-0A-EB-00-07-5F in the MAC
Address field, enter wireless station B in the Description field, select Deny in the Privilege
pull-down list and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button to complete this procedure.
The filtering rules just configured should look similar to the following list:
If you select the radio button
Allow the stations not specified by any enabled entries in the
list to access
for Filtering Rules, the wireless station B will still not be able to access the
router, however, other wireless stations that are not in the list will be able to access the router.
If you enable the function and select the
Deny the stations not specified by any enabled
entries in the list to access
for Filtering Rules, and there are not any enabled entries in the
list, thus, no wireless stations can access the router.
To add additional entries, repeat steps 1-5.
To modify or delete an existing entry:
Click the
Enable All
button to activate all entries enabled.
Click the
Disabled All
button to cancel all entries disabled.
Click the
Delete All
button to erase all entries.
Click the
Next
button to go to the following page and click the Previous button to return to the
previous page.
For example: If you want to grant access to wireless station A with MAC address 00-0A-EB-
00- 07-BE, but deny access to wireless station B with MAC address 00-0A-EB- 00-07-5F, while
all other wireless stations cannot access the router, you should configure the Wireless MAC
Address Filtering list by following these steps:
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
Note: