Nexxt Solutions - NexxtGate Wireless Access Point
68
4.15.7 Reboot
4.15.8 Password
Go to
System Tools
>
Reboot
in order to reset the device, as shown in the screen below.
Go to
System Tools
>
Password
in order to change the router’s factory default user name and
password, using the screen shown in Figure 4-65.
Click
Reboot
to initialize the AP.
Some device settings take effect only after the device is rebooted., which include:
It is strongly recommended that you change the factory default user name and password of the
AP to more secure ones because they control access to the AP’s web-based utility. All users who
try to access the AP’s web-based utility or Quick Setup will be prompted to type the AP’s user
name and password.
Note:
The new user name and password must not exceed 14 characters in length and must not
include any space. Enter the new Password twice to confirm it.
Click
Save
when finished.
Click
Clear All
to delete all existing entries.
Change LAN IP Address. (system will reboot automatically)
Upgrade the firmware of the AP (system will reboot automatically).
Restore the AP’s settings to factory default (system will reboot automatically).
DHCP service function.
Static address assignment of DHCP server.
•
•
•
•
•
Figure 4-64 Reboot the AP
Figure 4-65 Password
