Nexxt Solutions - NexxtGate Wireless Access Point
63
4.15.1 Time
Go to
System Tools > Time
in order to set the time manually or get the GMT from the Internet
for the router on the page as shown in Figure 4-58.
To configure
Time settings
, please follow the steps below:
The router will obtain GMT automatically when it connects to Internet.
Note:
Select your local time zone.
Enter date and time in the corresponding blank fields.
Click
Save
.
This setting will be used for some time-based functions such as firewall. You must specify
your time zone once you log in to the router successfully, otherwise, none of these functions
will work.
The time will be lost if the router is turned off.
1. Select
Using Daylight
Saving Time.
2. Enter daylight saving start time and end time in the blanks.
Time Zone
- Select your local time zone from this drop-down list.
Date
- Enter your local date in MM/DD/YY into the blank fields.
Time
- Enter your local time in HH/MM/SS into the blank fields.
Click the
Get GMT
button to get GMT time from the Internet if you have an active internet connection.
If you’re using Daylight saving time, please follow the steps below.
1.
2.
3.
1.
2.
•
•
•
Figure 4-58 Time settings
