Nexxt Solutions - NexxtGate Wireless Access Point
26
4.6.1 Basic settings
Go to
Wireless
>
Basic Settings
in order to configure the basic parameters of your wireless
network, as illustrated below (Figure 4-11).
SSID
- Enter a string of up to 32 characters The same name or SSID (Service Set Identifi-
cation) must be assigned to all wireless devices in your network. Considering your wireless
network security, the default SSID is set to be NEXXT_XXXXXX (in which xxxxxx represent the
last six unique characters of each router’s MAC address). But it is strongly recommended
that you change your network name (SSID) to a different value. This value is case-sensitive.
For example, TEST is NOT the same as test.
Region
- Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. t may be illegal to use the wireless function of the
router in a region different from those specified in this field. If your country or region is not
listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the
Save
button. The dialog
box with this note will be displayed. Click
OK
to continue.
•
•
Figure 4-10 Wireless menu
Figure 4-11 Wireless Settings in AP Client Router mode
