Nexxt Solutions - NexxtGate Wireless Access Point
44
To assign a computer or server to be a DMZ server:
Note:
Once you set the DMZ host, the firewall protection for that host will be disabled.
Click the
Enable
radio button.
Enter the IP address in the DMZ Host IP Address field of the local PC that you want to set as
the DMZ host.
Click the
Save
button when done.
1.
2.
3.
•
•
•
•
•
•
•
•
Current UPnP Status
- UPnP can be enabled or disabled by clicking the corresponding
button. As enabling UPnP may present a risk to security, this feature is disabled by default.
Current UPnP Settings List
- This table displays the current UPnP information.
Click
Enable
to activate the UPnP feature.
Click
Disable
to cancel the UPnP feature.
Click
Refresh
to update the Current UPnP Settings List.
App Description
- The description provided by the application in the UPnP request.
External Port -
The external port that the router opened for the application.
Protocol
- Shows which type of protocol is opened.
Internal Port
– The Internal port that the router opened as a local host.
IP Address
- The IP address of the local host that initiates the UPnP request.
Status
- The port status is displayed in this field. “Enabled” means that the port is still active.
Otherwise, the port will be inactive.
4.9.4 UPnP
Go to
Forwarding
>
UPnP
in order to configure the UPnP function on this page, as shown in
Figure 4-33:
Figure 4-33 UPnP Settings
