044
www.ruggedaq.com
DATALOGGER
NI400
NI400
045
www.ruggedaq.com
DATALOGGER
NI400
NI400
IOT Configuration
IOT Enable:
This checkbox, enables the communication with Exosite cloud. Read dedi-
cated chapter for more info.
Warning: beware of enabling this field. Before enabling this field, be sure to delete
all measure log present in memory. If memory is not clear, at the first acquisition, the
datalogger will process existing data and try to export to Exosite cloud. Usually this
operation requires few hours and the datalogger will be struck processing this data
for necessary time.
IOT CIK
: This field is dedicated to the CIK field, gathered from Exosite cloud after the cre-
ation of a device. Read dedicated chapter for more info.
Download/Upload Calibration:
it
allows logger calibration saving or restoring.
Default Settings Recover
: It will restore default settings
Reboot
: it reboots the datalogger
Configuration -> Acquisitions
in this page it is possible to set acquisitions frequency.
CHANNELS CONFIGURATION
Channels Configuration –> Locals
in this page it is possible to set local analog channels on the NI400.
ATTENTION: For sensors wiring it is necessary to refer to the schemes on the NI400 web
pages or to the chapter “Wiring”.
Sensor type is not editable by end user since it requires electrical modifications and
can be done only in our labs. “Admin” user can edit sensor’s parameters by clicking
“EDIT” button
Figure 43
Figure 44
Figure 42
5
5