manualshive.com logo in svg

Next NI400, Руководство пользователя, Страница: 18 / 59

Поделиться
Скачать
Next NI400 Скачать руководство пользователя страница 18

034

 www.ruggedaq.com

DATALOGGER

NI400

NI400

035

 www.ruggedaq.com

DATALOGGER

NI400

NI400

Start the tool 

NI400 Connect

NOTE: the tool has to be started with function “Run as administrator” (right button of 

the mouse on tool icon), otherwise the configuration doesn’t end well. This procedure 

is nec

essary also if you are the administrator of the PC.

If you don’t run “As administrator” the following error will appear:

So, the tool opens. Select the COM port assigned to the NI400 during the installation of 

the USB driver.

NOTE: to know which COM port has been assigned to the NI400, look to the COM ports 

list in Control Panel\Device Manager, maintaining the PC connected to the NI400. 

 

If the 

COM port

 doesn’t appear in the list, it is possible to click on bottom 

Refresh ports 

list

 to update the available ports.

After selecting the right 

COM port

, click on 

Connect

The creation of the remote connection starts. 

Figure 26

Figure 27

Figure 28

Figure 29

Figure 30

3

3

Содержание NI400




























































Отзывы:

Нет отзывов