036
www.ruggedaq.com
DATALOGGER
NI400
NI400
037
www.ruggedaq.com
DATALOGGER
NI400
NI400
Once the configuration ended, a confirmation message appears.
As describe in the message, select menu 8 on NI400 and press
ENTER button
(of NI400
keyboard).
When the
0 blinking
press
OK
on the tool.
Clicking on OK, the connection starts.
When the connection with NI400 is established, the following window appears
In this window you can find a reminder of defult IP address of NI400
It is possible to close the tool clicking on the
X
of the window
Open any internet browser and enter the IP address
192.168.125.1
.
NOTE: the 192.168.125.1 IP address cant’ be changed by the user.
You will be requested the NI400 log in and you can browse in its pages.
Every time that you need to reconnect a NI400 or connect a new one, you have to open
NI400 Connection Tool, select the correct COM port and click on CONNECT.
Try to install wrong version
NI400 Connection Tool has two different version. One for 32bit operative systems and one
for 64bit operative systems.
NI400 Connection Tool 64-bit on 32-bit operative system
If you try to launch a 64-bit version tool on 32-bit operative system, after the installation,
the following error message appears:
To solve this problem you have to uninstall the tool (Control Panel / Programs and Fea-
tures) and re-install the correct version of the NI400 Connection Tool.
NI400 Connection Tool 32-bit on 64-bit operative system
After the installation. iIf you try to launch a 32-bit version tool on 64-bit operative system
no message appears and all seams works fine. But when the NI400 Connection tool try to
create a new connection the following massage appears:
Figure 31
Figure 32
Figure 33
Figure 34
Figure 35
3
3