XPS-RL
Quick Start
2.0
Getting Started
2.1
Unpacking and Handling
It is recommended that the XPS-RL Controller/Driver be unpacked in your lab or work
site rather than at the receiving dock. Unpack the system carefully; small parts and
cables are included with the equipment. Inspect the box carefully for loose parts before
disposing of the packaging. You are urged to save the packaging material in case you
need to ship your equipment.
2.2
Inspection for Damage
XPS-RL Controller/Driver has been carefully packaged at the factory to minimize the
possibility of damage during shipping. Inspect the box for external signs of damage or
mishandling. Inspect the contents for damage. If there is visible damage to the
equipment upon receipt, inform the shipping company and Newport Corporation
immediately.
WARNING
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional personnel hazard. Contact
Newport technical support for advice before attempting to plug in
and operate damaged equipment.
2.3
Packing List
Included with each XPS-RL controller are the following items:
•
XPS-RL Quick Start.
•
XPS-RL controller.
•
Cross-over cable, gray, 3 meters.
•
Straight-through cable, black, 5 meters.
•
Power cord.
If there are missing hardware or have questions about the hardware that were received,
please contact Newport.
CAUTION
Before operating the XPS-RL controller, please read chapter 1.0 very
carefully.
5
EDH0367En1021 — 12/17
