XPS-RL
Quick Start
Check with your IT department that the lease time set at the DHCP is longer than the
time you plan to leave the XPS-RL switched off otherwise you will lose your dynamic
address and will need to connect to the REMOTE to know the new assigned one by the
DHCP.
NOTE
Do not use Dynamic IP configuration if your DHCP server uses Windows NT 4.0
2.5.6
Recovering a lost IP configuration
If you want to recover a lost IP configuration, you need to connect the PC directly to the
REMOTE connector at the back of the XPS-RL with the gray cross-over cable.
Figure 10: Direct connection to the XPS-RL
using a cross-over cable and the REMOTE connector.
EDH0367En1021 — 12/17
14
