27
3.2.6 Alarm 1 Menu (continued)
ALARM ENABLE/DISABLE AT POWER ON:
Press
d
Press
d
13)
Display flashes previous selection. Press
b
to
ENBL
enable or
DSBL
disable.
14)
Display shows
STRD
stored message. momentarily and
then advances to
ALR.L
only if it was changed, otherwise
press
a
to advance to the
ALR.L
Alarm 1 Low Value
Submenu.
If the alarm is enabled at Power On, the alarm will be active right after
reset. If the alarm is disabled at Power On, the alarm will become
enabled when the process value enters the non alarm area.
The alarm is not active while the process value is approaching
Setpoint 1.
ALARM 1 LOW VALUE SUBMENU:
Press
d
Press
b
&
c
Press
d
15)
Display flashes first digit of previous value. Use
b
and
c
to
enter new value.
16)
Use
b
and
c
to enter Alarm 1 Low Value.
17)
Display shows
STRD
storage message momentarily and
then advances to
ALR.H
only, if it was changed, otherwise
press a to advance to
ALR.H
Alarm 1 Hi Value Submenu.
ALARM 1 HI VALUE SUBMENU:
Press
d
Press
b
&
c
Press
d
18)
Display flashes first digit of previous value. Use
b
and
c
to
enter new value.
19)
Use
b
and
c
to enter Alarm 1 Hi Value.
20)
Display shows
STRD
stored message momentarily and
then advances to the next menu only, if it was changed,
otherwise press
a
to advance to the next menu.
Содержание i16-AL
Страница 17: ...13 3 2 Menu Configuration Figure 3 1 Flow Chart for ID and Set Points Menu...
Страница 45: ...NOTES...
Страница 46: ...NOTES...
Страница 48: ...M5290 N 0613...
