Newport i16-AL, Руководство оператора

Страница: 18 / 48

14
3.2.1 ID Number Menu
SEE ID MENU SELECTION IN CONFIGURATION SECTION FOR
ENABLE/DISABLE OR CHANGE ID CODE.
If ID Code is Disabled or set as Default (0000) the menu will skip ID
step to Setpoint Menu.
If ID Code is set to Full Security Level and user attempts to enter the
Main Menu, they will be prompted for an ID Code.
If ID Code is set to Set Point/ID Security Level and user attempts to
enter the Configuration Menu, they will be prompted for an ID Code.
ENTERING YOUR NON-DEFAULT FULL SECURITY ID NUMBER.
Press
a
Press
d
Press
b
&
c
Press
d
1) Display shows
ID
.
2) Display advances to
____
3) Press
b
to increase digit 0-9. Press
c
to activate next digit
(flashing). Continue to use
b
and
c
to enter your 4-digit ID code.
4) If the correct ID code is entered, the menu will advance
to the Setpoint 1 Menu, otherwise an error message
ERRo
will be displayed and the instrument will return to the Run Mode.
To change ID Code, see ID Menu in the Configuration section.
ENTERING YOUR NON-DEFAULT SET POINT/ID SECURITY ID NUMBER.
Press
a
Press
a
Press
a
Press
d
Press
b
&
c
Press
d
5) Display shows
SP1
Setpoint 1 Menu.
6) Display shows
SP2
Setpoint 2 Menu.
7) Display shows
ID
ID Code Menu.
8) Display advances to
____
.
9) Use
b
and
c
to change your ID Code.
10) If the correct ID code is entered, the display will advance
to the
INPT
Input Menu, otherwise the error message
ERRo
will be displayed and the unit will return to the Run Mode.
To prevent unauthorized tampering with the setup parameters, the
instrument provides protection by requiring the user to enter the ID
Code before allowing access to subsequent menus. If the ID Code
entered does not match the ID Code stored, the unit responds with an
error message and access to subsequent menus will be denied.
Use numbers that are easy for you to remember. If the ID Code is
forgotten or lost, call customer service with your serial number to
access and reset the default to
0000
.