Newport i16-AL, Руководство оператора

Страница: 38 / 48

34
ALARM 2 DISPLAY COLOR SUBMENU:
Press
d
11) Display flashes previous selection for “Alarm 2 Color Display”.
Press
b
12) Scroll through the available selections:
GRN
,
RED
or
AMBR
.
Press
d
13) Display shows
STRD
stored message momentarily and
then momentarily shows the software version number, followed
by
RST
Reset, and then proceeds to the Run Mode.
IN ORDER TO DISPLAY ONE COLOR, SET THE SAME DISPLAY
COLOR ON ALL THREE SUBMENUS ABOVE.
If user wants the display to change color every time that both Alarm
1 and Alarm 2 are triggered, the Alarm values should be set in such
a way that Alarm 1 value is always on the top of Alarm 2 value,
otherwise value of Alarm 1 will overwrite value of Alarm 2 and
Display Color would not change when Alarm 2 is triggered.
Example 1:
Alarm Setup: Absolute, Above, Alarm 2 HI Value “ALR.H” = 212,
Alarm 1 Below, LO Value “ALR.L” = 32
“Color Display” Setup: Normal Color “N.CLR” = Green, Alarm 1 Color
“1.CLR” = Amber, Alarm 2 Color “2.CLR” = Red
Display Colors change sequences:
AMBER | GREEN | RED
•
u
--------------------------------• -----------------------------• ------------------------------
u
0 AL1.L = 32 AL2.H = 212
AMBER | GREEN | RED
•
t
--------------------------------• -----------------------------• ------------------------------
t
0 AL1.L = 32 AL2.H = 212 300
Example 2:
Alarm Setup: Absolute, Below, Alarm 2 Low Value “ALR.L” = 300,
Alarm 1 Low Value “ALR.L” = 100
Color Display Setup: “N.CLR” = Green, “1.CLR” = Amber, “2.CLR” =
Red
Display Colors change sequences:
AMBER | RED | GREEN
•
t
--------------• ----------------------------------• ------------------------------------------
t
--•
0 AL1.L = 100 AL2.L = 300